Winter runner

This started out as a Christmas runner. But I didn't get it done in time and Christmas has come and gone, so I'm calling it a winter runner. It's not super Christmassy anyway. I used the Emerson Street Table Topper tutorial at the Moda Bake Shop, only I substituted a couple of plain blocks on each long side and I also shortened it some, since my table isn't all that long. Warning-if you ever try this tutorial, there have been corrections made on the blog post that were NOT made on the pdf file. Therefore, mine is also a slightly different width. The fabric is Colorful Christmas from Riley Blake.





Pictured below is the back, which is pieced from the leftovers. The binding is also pieced from leftovers. I did use bias binding, but because of the corner pinwheel blocks I decided to make mitered corners instead of my usual rounded ones. But even with mitering, I think it is so much easier with bias binding.
 

For the label, I decided to use a tutorial from Jaybird Quilts to incorporate my label into the back. It was much easier and since I was already piecing the back anyway, it was not any extra work. I didn't have to worry about remembering to sew the label on while binding or after finishing it. I loved this method. It's hard to see it, but on the picture above, the label is right by the top left corner of the green fabric. Here is a close-up.